Taxi Driver Online
http://taxi-driver.co.uk/phpBB2/

E7 "Refresh" Flywheel
http://taxi-driver.co.uk/phpBB2/viewtopic.php?f=8&t=14599		 Page 1 of 1
Author:  Chester J.D. [ Mon Aug 02, 2010 2:26 am ]
Post subject:  E7 "Refresh" Flywheel
So after all the denial from peugeot that there was something wrong with the Dual Mass Flywheel it suddenly seems that Cab Direct are offering a NEW heavy duty dual-mass clutch and flywheel on the current E7

Any ideas what difference this "NEW heavy duty dual-mass clutch and flywheel" has from the old one and if there was nothing wrong with it then why change it.

I have had a judder from starting off in 1st for over 30,000 miles and got absolutely nowhere with the warranty.
Author:  Sussex [ Mon Aug 02, 2010 7:28 am ]
Post subject: 
On the Fiat version of E7/TW/Citreon old type cabs you can get a blank flywheel.

I think it's an extra £50 or so when you put a new clutch in. Money well spent IMO.
Author:  Charlie 2 [ Fri Aug 06, 2010 5:18 pm ]
Post subject: 
what has been the problem with the flywheel how do i know if mines knackered
Author:  gusmac [ Fri Aug 06, 2010 7:27 pm ]
Post subject: 
If the DMF is nackered, you usually hear it rattling when the engine is running and you are in neutral.

I swapped the DMF and clutch on my sharan for a solid flywheel kit 20k ago and no problems. Don't know if you can get one for an E7.
Author:  skippy41 [ Fri Aug 06, 2010 9:46 pm ]
Post subject: 
gusmac wrote:
If the DMF is nackered, you usually hear it rattling when the engine is running and you are in neutral.

I swapped the DMF and clutch on my sharan for a solid flywheel kit 20k ago and no problems. Don't know if you can get one for an E7.


Did the same to my Octavia last year 80K on no problems
Author:  Chester J.D. [ Tue Aug 10, 2010 1:10 am ]
Post subject: 
gusmac wrote:
. Don't know if you can get one for an E7.


That was the point of the original question as to whether the DMF has been replaced with a solid one. Or just a different version of the same thing.
Author:  skippy41 [ Tue Aug 10, 2010 3:48 am ]
Post subject: 
JDBubbles wrote:
gusmac wrote:
. Don't know if you can get one for an E7.


That was the point of the original question as to whether the DMF has been replaced with a solid one. Or just a different version of the same thing.


Yes its solid one made by sakes
Author:  Chester J.D. [ Tue Aug 10, 2010 10:16 am ]
Post subject: 
skippy41 wrote:
Yes its solid one made by sakes


Thank You, I may even consider getting mine replaced now.
Author:  Nigel [ Thu Aug 12, 2010 7:50 am ]
Post subject: 
We've sourced a manufacturer in Nottingham who can provide solid mass fly wheels at a greater reduced price than you pay in the shops.
Author:  wannabeeahack [ Wed Dec 15, 2010 1:28 pm ]
Post subject: 
there is a BETTER make of DMF produced by Sachs, the common or garden unit is made by LUK

if they produce one for your vehicle
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/