Taxi Driver Online
http://taxi-driver.co.uk/phpBB2/

2010 Mazda 6 2.2D
http://taxi-driver.co.uk/phpBB2/viewtopic.php?f=8&t=22905		 Page 1 of 1
Author:  Hootbleet [ Fri Aug 23, 2013 3:58 pm ]
Post subject:  2010 Mazda 6 2.2D
Getting my new Mazda on wednesday and just wondering if these have a pulse wire or will it need a canbus? I've a digitax 806 meter fitted in my current Mazda 6 (2005 model) and was hoping it would be just as straight forward again. Don't like seeing digitax agents taking my new car's dash apart.
Author:  Nidge2 [ Fri Aug 23, 2013 9:06 pm ]
Post subject:  Re: 2010 Mazda 6 2.2D
Hootbleet wrote:
Getting my new Mazda on wednesday and just wondering if these have a pulse wire or will it need a canbus? I've a digitax 806 meter fitted in my current Mazda 6 (2005 model) and was hoping it would be just as straight forward again. Don't like seeing digitax agents taking my new car's dash apart.



They'll need to take it apart to get to the pulse wire I'm afraid.
Author:  Hootbleet [ Sat Aug 24, 2013 7:08 am ]
Post subject:  Re: 2010 Mazda 6 2.2D
Nidge2 wrote:
Hootbleet wrote:
Getting my new Mazda on wednesday and just wondering if these have a pulse wire or will it need a canbus? I've a digitax 806 meter fitted in my current Mazda 6 (2005 model) and was hoping it would be just as straight forward again. Don't like seeing digitax agents taking my new car's dash apart.



They'll need to take it apart to get to the pulse wire I'm afraid.


In the old mazda, you could get to the pulse wire by just removing the glovebox, they only realized this after they pulled the centre console out and damaged the heater dials. #-o
Author:  United Taxis 11 [ Fri Sep 06, 2013 4:28 pm ]
Post subject:  Re: 2010 Mazda 6 2.2D
Hootbleet wrote:
Nidge2 wrote:
Hootbleet wrote:
Getting my new Mazda on wednesday and just wondering if these have a pulse wire or will it need a canbus? I've a digitax 806 meter fitted in my current Mazda 6 (2005 model) and was hoping it would be just as straight forward again. Don't like seeing digitax agents taking my new car's dash apart.



They'll need to take it apart to get to the pulse wire I'm afraid.


In the old mazda, you could get to the pulse wire by just removing the glovebox, they only realized this after they pulled the centre console out and damaged the heater dials. #-o

They will remove the binnacle to get a pulse, it had to be done with my superb but If its done right there is nothing to worry about
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/