Joined: Mon Sep 18, 2017 11:40 pm Posts: 1
|
Long story short. Engine rebuilt. Lack of power and banging into gear sometimes. Engine man says engine is good not he's fault. Gearbox man says all good there. Electrician says loom is good and so is maf sensor. I cleaned boost sensor. No difference maybe banging it into gear a little harder,always 2-3 worse when forced to kickdown. Anyone know what the sensor behind the rocker breather is and should I clean that. Any ideas on any of it would be appreciated I've been going in circles since may. Thanks gents. Almost forgot he blanked of the egr valve but most don't think this would contribute to the problem.
|
|